Electric gate valve is a widely used valve, which is mainly used in analog quantity regulation of medium flow in liquid, gas and air systems. It is AI control. In the control of large valves and air systems, electric valves can also be used for two position switch control. Now let's take a look at the principle of electric gate valve.

The operating principle of electric gate valve is that the electric gate valve is usually connected with the valve by the electric actuator and becomes an electric valve after installation and commissioning. The electric gate valve uses electric energy as power to connect the electric actuator to drive the valve, realizing the opening and closing and regulating actions of the valve. So as to achieve the purpose of switching or regulating the pipeline medium.

Working property of electric gate valve: electric valve is generally driven by motor, which is relatively resistant to voltage impact. The solenoid valve is quick open and quick close, which is generally used in small flow and small pressure, and the electric valve in the place where the switching frequency is required to be large is on the contrary. The opening of the electric valve can be controlled, and the states are open, closed, half open and half closed. It can control the flow of the medium in the pipeline, but the solenoid valve cannot meet this requirement.